Series SGP: 1.6% Full Scale Accuracy, 316, 316L SS & PTFE Wetted Parts Stainless Steel Schaeffer Gage has ranges of vacuum, compound and pressures are available. Applications include chemical, cement, fertilizer, refinery, and power.

Series SGA: Brass Wetted Parts, Bottom or Back Connection 1.5" & 2" Industrial Pressure Gage

Series 490: Liquid & Gas Pressure Measurement, ±0.5% F.S. Accuracy Wet/Wet Handheld Digital Manometer

Series BTG: Monitor Tank Unloading Discharge Pressure Bulk Tanker Gage

Series CONG: Large Easy-to-Read Dial Contractor Gage

Series DH3: 3 in 1 Instrument: Gage, Switch and Transmitter, Square Root Output for Flow Differential Pressure Controllers are available in 3-in-1 instruments that have a digital display gage, control relay switches, and a transmitter with current output.

Series 672: Single Pressure Connection, Ranges Down to 10 in w.c. Low Pressure Transducer is used for applications where a very accurate low pressure transducer is needed. Used in liquid level, flood warning, and waste water.

Series AT2MS: Series MS in Flameproof Enclosure ATEX/IECEx Approved Magnesense® Differential Pressure Transmitter is versatile in monitoring pressure and air velocity in hazardous locations.

Questions

Question

What restrictions, if any, are imposed for the Magnehelic® and Photohelic® gages in vacuum service?

Answer

In applications involving higher vacuums than 20" Hg, leakage due to gage housing porosity becomes the limiting factor.

Related

Series MP

Series 2000-SP

Series 2000

Series 3000MR/3000MRS

Series 605

Series DCTE

Series A3000

Series 43000

Question

A customer would like to get switching capability, local pressure indication, and a 4-20 mA output signal all in one device. Do we have a product to offer them?

Answer

Yes. The DH, DHII or DH3 possess high/low set points, digital gage display and 4-20 mA full scale output signal for air and compatible gas. The EDA, DPG-200, DPT and the MDPC possess high/low set points, digital gage display and 4-20 mA full scale output signal for compatible fluids.

Related

Series DHII

Series DPT

Series EDA

Series DH

Series DH3

Series MDPC

Series DPG-200

Question

What is the NEMA rating of a Photohelic®?

Answer

Our standard is considered to be NEMA 1 rated for general purpose. We do have weatherproof (NEMA 4X) and explosion-proof (NEMA 7 & 9) enclosures available.

Related

Series 3000MR/3000MRS

Series A3000

Series 43000

Question

We are using your DH3 Digihelic pressure transmitters and have a question regarding the pressure connections. The model we have has a bi-directional range of -5" w.c. to +5" w.c. We have a single connection to our process and the other is vented to atmosphere. Which of the connections, ("LO" or "HI") would be used for the process connection in this case?

Answer

Related

Series DH3

Question

Your Magnehelic gauge doesn't come with a calibration certificate, do you have any documentation for these gauges to meet these needs?

Answer

We have 3 options: (1) We can supply a Certificate of Conformance at no charge if you request that certificate at the time of order. The Certificate of conformance would state that each Magnehelic gauge is calibrated to meet the specifications stated on the spec sheet. (2) We offer a factory calibration “-FC” as an option that is a certificate of the standard calibration points at the time of manufacture, for a small fee. (3) We can also provide a NIST-traceable calibration for an extra charge per gage if that is required. To get the NIST-traceable calibration, you would simply add a “-NIST” to the end of your part number. NIST-traceable calibrations will come with the 6 point calibration certificate. We recommend “periodic calibration” for our Magnehelic, though we leave the specific time-frame up to the end user, since different organizations have different requirements (i.e. government groups often require more frequent calibrations.) If you choose to have the NIST traceable calib

Related